ProtectGuard HD
Heavy Duty Water and Oil Repellent Concrete Sealant
ProtectGuard® HD is the sealant of choice for all round sealing applications. The natural look sealant is specifically designed to repel both oil and water on areas subject to high abrasion.
R1322,50 Incl. VAT
5 Litre
Indicative Price per m²: R44.08
BEADING EFFECT
ECO-FRIENDLY
FLOORS & WALLS
COVERAGE (1L = 6M2)
Advantages:
- Protects against water, oil, food stains and graffiti.
- Slows down ageing and makes maintenance easier
- Does not change the colour or form a film – lets the material “breathe”.
- UV resistant, preventing colour fade.
- Safe to use & easy to apply.
Suitable applications:
- Porous materials: natural or reconstituted stone, concrete, terracotta, etc.
- Driveways, garage floors, pool surrounds, patios and other entertainment areas.
- Walls, facades, sidewalks, parking lots, industrial compounds & depots.
- New or old (prepared) surfaces.
- Internal or external application.
- Description
- Surface Preparation & Application
- Application Tools
- Technical Information
- Additional information
- Reviews (0)
ProtectGuard® HD is able to withstand high traffic and high soiling loads without compromising efficacy. ProtectGuard® HD is an ideal sealant for driveways, garage floors, pool surrounds, entertainment areas and many other commercial applications. Potential spills and stains can easily be cleaned off the surface during regular cleaning.
ProtectGuard® HD combats the main causes of urban degradation, such as atmospheric pollution, greasy soiling, water seepage, acid rain, chewing gum and general dirt and grime. It prevents these contaminants from soaking into the surface and, therefore, prevents permanent staining. Even graffiti is no match for ProtectGuard HD – It prevents paint and ink from getting into the pores of the treated surface.
Being a non-film forming impregnation sealant, ProtectGuard® HD does not alter the natural look or texture of the material being sealed. This also means that it will not alter the natural grip of the flooring materials. This is particularly important in pedestrian applications where slip hazards need to be eliminated. Furthermore, It is also is fully UV ray resistant and does not yellow over time.
Surface Preparation
- Apply the product to a clean, dust-free, grease-free and dry surface.
- To remove stains and traces of pollution, use Guard Wash® Express.
- To remove traces of efflorescence, laitance or grout film, use Guard Remover® Eco Efflorescence & Cement.
- For low porosity materials, use Guard Cleaner Eco® Surface Preparation prior to application.
Application
- Use the product in its pure form – do not dilute it.
- Shake well before use and perform a preliminary test to check that the product has correctly penetrated and the appearance after drying.
- The material must be impregnated up to saturation in a single coat or two coats ” wet on wet”.
- Do not overload the material, remove any excess before drying.
- On vertical materials, apply from bottom to top
- Protected drying – 24 hours.
- Optimal efficiency reached after 7 days.
For further information, refer to the technical data sheet and safety sheet.
Apply using a low-pressure sprayer, roller or brush.
| Size | 5L |
| Weight | 5kg |
| Dimensions | 180 x 110 x 280mm |
| Weight | 5 kg |
|---|---|
| Dimensions | 18 × 11 × 28 cm |
| Size | 5L |
| Protection Type | Oil Repellent, Stain Repellent, Water Repellent |
| Application | Floor, Outdoor, Wall |
Reviews
There are no reviews yet.