GuardRemover Eco Efflorescence & Cement
Efflorescence and Cement Remover
Guard Remover® Eco Efflorescence & Cement is a safe alternative to acid-based cleaners. Ideal for removing efflorescence from concrete products, removing small cement deposits left behind during construction as well as removing grouting haze or film from tiles.
R345,00 Incl. VAT
5 Litre
Indicative Price per m²: R13.80 (Based on 5sqm/ltr)
QUICK ACTION
ECO-FRIENDLY
FLOORS & WALLS
COVERAGE (1L = 5M2)
Advantages:
- Removes laitance, efflorescence and limescale deposits
- Powerful cement stripper
- Increases porosity in preparation for sealants
- Quick and efficient
- Non corrosive and non-irritant
- 70% biodegradable
Suitable applications:
- All types of materials: natural or reconstituted stone, concrete, paving, terracotta, tiling, etc.
- Floors and walls
- Internal and external
- Ideal for preparing the material before a protective sealant is applied.
Guard Remover® Eco Efflorescence & Cement is a water based, biodegradable cleaner and stripper that removes efflorescence, cement, concrete and lime from most surfaces. It is significantly less hazardous than other acid-based products on the market.
Ideal to rapidly to clean cement haze and stains off of pavers, bricks, natural or reconstituted stone, concrete, terracotta, tiling, and many other types of materials; as well as to clean efflorescence off of pavers before applying concrete sealants.
Designed to meet the varying requirements of safety, effectiveness and impact on the environment, Guard Remover® Eco Efflorescence & Cement requires no neutralisation after rinsing with water. It is non corrosive and non-irritant.
Guard Remover® Eco Efflorescence & Cement removes surface contaminants and thereby increases penetration of sealers, paints and other coatings. It is recommended in preparation for most Guard Industry sealers when applied to concrete and cementitious materials. Guard Remover® Eco Efflorescence Remover is tough on efflorescence but gentle on stone and brick. It’s a safe acid alternative that will remove efflorescence without damaging the material applied to.
Guard Remover® Eco Efflorescence & Cement is safe to use and safe for the environment. It is a water-based product that is non corrosive and non-irritant. It is non-toxic and has essentially no VOC’s (>1g/l). The surfactants used in this product are biodegradable to 70% within 28 days.
- Shake the product well before use and apply undiluted.
- Always test on a small hidden portion of the substrate before applying.
- To increase the efficiency, first wet the surface with water.
- Apply the product liberally to the surface.
- Allow it to act 5 minutes maximum.
- Do not allow the product to dry prior to rinsing.
- Rinse the entire substrate with a high-pressure washer once the material deposits have softened. Otherwise, brush off using a thick bristle broom, and then rinse with water from a hosepipe whilst brushing at the same time.
For further information, refer to the technical data sheet and safety sheet.
Apply using a low-pressure sprayer or brush.
| Size | 5L |
| Weight | 5kg |
| Dimensions | 180 x 110 x 280mm |
| Weight | 5 kg |
|---|---|
| Dimensions | 18 × 11 × 28 cm |
| Size | 5L |
| Application | Floor, Wall |
Reviews
There are no reviews yet.